Author Topic: I can finally host game voice and UT!!! (Read 10242 times)

n1c · « **Reply #25 on:** August 15, 2002, 10:00:06 PM »

its a little more complex than a reboot can fix...

Im not as dumb as a snail

opiesilver · « **Reply #26 on:** August 15, 2002, 11:46:15 PM »

I've done my research, and yes I am on the latest firmware. It just has the 9110 port disabled for whatever reason. Had I not been so tired when I decided to play with it, I would have snooped this box and found out what it was trying to do and what the router wasn't.

opiesilver · « **Reply #27 on:** August 15, 2002, 11:47:23 PM »

Is anyone else having trouble quoting?

Morpheus · « **Reply #28 on:** August 16, 2002, 09:35:11 AM »

ZWarrior · « **Reply #29 on:** August 16, 2002, 10:13:55 AM »

PHP 4.2.2 upgrade hits again. I will add it too my list.

ZWarrior · « **Reply #30 on:** August 16, 2002, 10:16:28 AM »

BTW, the clock is right. You are looking at the last time you logged in. If you don't logout, I don't usually, then that will show the last time you logged in.

opiesilver · « **Reply #31 on:** August 16, 2002, 10:19:47 AM »

Ummmm....I just logged in and it's still 13 hours off.

ZWarrior · « **Reply #32 on:** August 16, 2002, 11:02:24 AM »

Where are you looking? Are you looking at the "Last Active: X-X-XXXX at XX:XX"?

I am having a problem with the cookies from the forums not being deleted when you click logout, so you don't actually get logged out.

Mine says: "Last active: 8-5-2002 at 19:50" but I was on last night at midnight. Tried logout, but it wouldn't do it.
The post times are correct, as long as you have your timezone set in your profile.

opiesilver · « **Reply #33 on:** August 16, 2002, 01:22:38 PM »

too weird....

Wolverine of Ambush! · « **Reply #34 on:** August 16, 2002, 04:42:35 PM »

That is weird!

n1c · « **Reply #35 on:** October 26, 2002, 04:25:14 PM »

I am soldering some wires and LED's in My mouse and I was wondering what would be Good to cover the exposed solderd wires???

Should I just use a little Electrical tape or is there somthing better that looks and works better?

?

n1c · « **Reply #36 on:** November 03, 2002, 07:28:36 PM »

nevermind to that/

But. My monitor has a high pched sqweal to it when its in 1024x768:;(::;(::;(::;(:

opiesilver · « **Reply #37 on:** November 04, 2002, 01:53:38 AM »

That monitor is on it's way out. You probably have 6 months to live, maybe less. It's a good excues for a new monitor.

ZWarrior · « **Reply #38 on:** November 04, 2002, 07:52:50 AM »

Generally squealing is a sign of a bad solder joint. However, if it only occurs at certain frequencies, it could be related to the flyback. Either way it generally means it's time to get out the soldering iron. But with the cost of monitors today...

Morpheus · « **Reply #39 on:** November 04, 2002, 10:03:00 AM »

To cover the solder, I like the shrink tubing, gives it some stability too, comes in lots of colors and is relatively cheap. All you need is a hair blow dryer.

News:

Recent Posts

Fiction

Permissions

Author Topic: I can finally host game voice and UT!!! (Read 10242 times)